skip to Main Content

VETROIN collection

Since 2006 VETROIN designs and manufactures glass partitions of the latest generation for the office. Transparency, functionality and design have inspired 5 ranges of partition walls: from simple single-glazed to the evolved double-glazed systems, from the innovative partitions with recessed track up to the traditional wall units, partitioning and storage. VETROIN has been able to evolve its experience of glassworks, which began in 2001, so as to provide its customers with transparent partitions that exceed the ordinary practice. Laser processing, glass layering with fabrics and wood, lcd film to adjust the transparency, rear and front projection systems. All expertly orchestrated by technical experience and expertise that allows each time to evolve projects and make them unique and exclusive. The method, research, passion have been recognized in the iso 9001 and leed certification. Attention to the environment and its protection have started the procedure of environmental management to comply with the requirements of uni en iso 14001 certification for design, production and installation. Vetroin today designs and manufactures partitions of the latest generation in glass, aluminum and wood for any location.

EVOLVINWALL

Evolvinwall is a system of interior demountable partition walls in which the panels, in glass and wood, are self-bearing. EW1 and EWA versions are single-glazed, central and asymmetric, EW2 version is double-glazed, EWC is composed of two solid panels.

The partitions, 100 mm thick, are made of extruded aluminium profiles designed to house safety glass panels, special glazed panels with wood or fabric, solid panels in melamine, veneer coated or lacquered. Top and bottom tracks allow the perfect leveling of the partition wall and can house 10/11 mm or 12/13 mm laminated glasses.

The fixing of the glasses is guaranteed by plastic gaskets, connections between elements, linear or with variable angle, are provided by profiles in aluminium, transparent polycarbonate or in crystal clear double-sided tape. Doors are available in hinged or inner sliding type, with single or double leaf, in glass or solid, and can be provided in full-height version too.

HIDE

Hide is a range of interior demountable partition walls that allows the complete integration with the architectural setting. Top and bottom tracks can be either perfectly recessed into the floor and false ceiling, in order to increase the monolithic effect of the glazed partition walls, or external, but of very small dimensions, which can be installed semi-recessed too.

The partitions, between 50 and 100 mm thick, are made of extruded aluminium profiles designed to house safety laminated glasses, glasses with inner wood or fabric, which thickness is between 10 and 16 mm.

The fixing of the glasses is provided by plastic gaskets, connections between elements, linear or with variable angle, are guaranteed by profiles in aluminium, transparent polycarbonate or in crystal clear double-sided tape. Doors are available in hinged or sliding type, with single or double leaf in glass or wood, and can be provided in full-height version too.

SOLID WALL

Solid Wall is a traditional partition wall unit, 100 mm thick, to be fitted with accessories and proposed in 3 versions: wooden solid, single glass and double glass. It is composed of an inner supporting structure in zinc-coated vertical and horizontal profiles and it is fitted with infill modules, 50/100/150/200 cm wide, that are fixed by a snap system by harmonic steel springs that are pre-inserted in free positions into the perimetric cutting of the panels.

The posts are equipped with adjustable feet both floor and ceiling. Connection points between the structure and the infill panels are covered by a gap seal. Floor and ceiling profiles, corners, starting, ending and glass-stopper profiles are made of extruded aluminium and are equipped with plastic seal gaskets. Doors are available in the hinged version with solid or glass leaf or in the external sliding version, with single or double leaf, and they can be provided both in standard and full-height.

STORAGE WALL

Storage wall is a modular storage wall with elements 50 and 100 cm wide and 46 cm deep. It has a supporting structure composed of melamine coated vertical panels, 22 cm thick, and of adjustable feet for levelling. The uprights have a pitch double drilling in order to allow the positioning of the inner shelves, metal or wooden. The horizontal stabilization is provided by the structural back panel, 18 mm thick.

Floor and ceiling perfect sealing is guaranteed by a continuous aluminium base equipped of compensation gaskets. The doors are solid or with framed glass, in standard or full-height. They are equipped with 95° opening hinges, gaskets, handles and lock.

The partition is completed by wall abutments, corners, finishing side panels and plug elements for compensating out of size sections. Storage wall is perfectly integrated with all partition walls that Vetroin manufactures.

TRUELIGHT

Truelight is a range of interior demountable partition walls with separating function. TL60 is the classical single-glass system. TL41 and 42 are the versions with small track, single and double glass. The partitions, 35 mm thick, are made of extruded aluminium profiles designed to house safety glass panels, special glazed panels with wood or fabric, veneer coated panels. Top and bottom tracks allow the perfect leveling of the partition wall and can house 10/11 mm or 12/13 mm laminated glasses.

The fixing of the glasses inside the tracks is provided by plastic gaskets. Connections between glass elements, linear or with variable angle, are guaranteed by profiles in aluminium, transparent polycarbonate or in crystal clear double-sided tape. Doors are available in hinged or sliding type, with single or double leaf in glass or wood, and can be provided in full-height version too.

Back To Top
Close search
Search